| Description |
1 online resource |
| Series |
Materials Science Forum ; Volume 857 |
|
Materials science forum ; v. 857.
|
| Contents |
Advanced Materials Engineering and Technology IV -- Preface, Committees -- Table of Contents -- Chapter 1: Materials and Technologies for Soldering and Packaging in Electronics -- Intermetallic Study on the Modified Sn-3.5Ag-1.0Cu-1.0Zn Lead Free Solder -- Solderability and Interfacial Intermetallic Compound (IMC) Growth of Sn-Cu-Ni Solder with Additions of Germanium -- The Effects of Zinc Addition on the Microstructure, Melting Point and Microhardness of Sn-0.7Cu Lead-Free Solder Fabricated via Powder Metallurgy Method -- Properties of Aluminum Matrix Composite (AMCs) for Electronic Packaging -- Effects of Wetting Behavior on Gallium Addition in In-Zn Solder Alloy -- The Alloying and Aging Effects on the Wettability and Intermetallic Bonding of the Sn-Zn-Cu-Bi Soldering Alloy on a Cu Substrate -- Nanoindentation Study on Heat Treated Gold Wire Bonding -- Directional Growth Behaviour of Intermetallic Compound of Sn3.0Ag0.5Cu/ImSn Subjected to Thermal Cycling -- Nanoindentation of Sn3.0Ag0.5Cu/ENIG Solder Joint after High Temperature Storage -- Solidification of Sn-3Ag-0.5Cu and Sn-0.7Cu-0.05Ni Solders -- Effects of Trace Phosphorus in Sn-Cu-Ni Wave Solder Dross -- Suppression of Cu3Sn with Ni in High Cu Containing Sn-Cu Solder Alloys -- Peritectic Reactions and Phase Transformations of Sn-30wt%Cu for High Temperature Pb-Free Soldering Applications -- XPS Analysis of Oxide Films on Lead-Free Solders with Trace Additions of Germanium and Gallium -- Improvement of Sn-0.7Cu Lead Free Solder Joints on Shear Strength with Addition of Titanium Oxide (TiO2) Particles -- Surface Roughness and Wettability of SAC/CNT Lead Free Solder -- Wettability of CNT-Doped Solder under Isothermal Aging -- Mechanical Interlocking on Leadframe Surface for Bondability of Au Wedge Bond -- Ultrasonic Vibration in Leadframe for the Bondability for Au Wedge Bond |
|
Wettability of Soldering Alloys at Heating by Electron Beam -- Mechanical and Electrical Properties of Carbon Nanotubes Based Isotropic Conductive Adhesives -- Chapter 2: Materials for Electronics, Optoelectronics and Electrotechnical Industry -- Effect of Loading Amount of Glucose Precursor on Mesoporous Carbon Surface Area for Supercapacitor Electrode Application -- Effect of Al Excess on the Band Structure of ZnO Using Density Functional Theory -- Microwave Irradiation Assisted Synthesis of Silicon Carbide Nanotubes -- Characterization of Silicon Carbide Nanowhiskers Synthesized by Microwave Heating Using Photoluminescence Spectroscopy and Fourier Transform Infrared Spectroscopy -- Synthesis of Silicon Carbide Nanowhiskers from Graphite and Silica of Different Ratio by Microwave Irradiation Assisted Synthesis -- Effect of Stoichiometry and Sintering Temperature on the Mechanical Properties of Zinc Ferrite (ZnxFe3-xO4) -- p-Type Conductivity Control in ZnO Films Grown by Molecular-Beam Epitaxy -- Synthesis and Characterization of Ni0.8Zn0.2Fe2O4 Nanoparticles by Self-Combustion Technique -- Synthesis of Chlorophyll Thin Film from Noni Leaves via Dip Coating Process -- Properties of Y3Fe5O12 (YIG) as Nanocatalyst for Ammonia Formation Produced from Magnetic Induction Method (MIM) -- Response Surface Methodology (RSM) in Fabrication of Nanostructured Silicon -- Chapter 3: Composite and Polymer Materials -- Rigid Polyurethane Foam with Ionic Liquid Modified Multi Walled Carbon Nanotubes Composites -- The Effects of Trans-Polyoctylene Rubber (TOR) on the Cure Characteristics and Swelling Behaviour of Activated Carbon Filled Styrene Butadiene Rubber (SBR) Vulcanizates -- Composite Materials Characterization for Aircraft Application -- The Influence of Blending Methods in Epoxy/PMMA Polymer Blend |
|
Development of Seamless Pipe Based on Al/Al2O3 Composite Produced by Stir Casting and Centrifugal Casting -- Effects of Composition and Fe on the Liquid Phase Sintered W-Brass Composites -- Palm Kernel Shell Filled Recycled High-Density Polyethylene: Effect of Filler Loading -- Chapter 4: Materials and Processing Technologies for Mechanical Engineering -- Control of Temperature in Cutting Zone in Machining of Alloyed Case-Hardened Steels by Applying a Ceramic Tool with Wear-Resistant Coatings -- Comparative Evaluation of Properties of Various Tool Materials by Area of Indentation Track in Pendulum Scratch Testing -- Edge Cutting Tools for Machining of Hard-to-Cut Materials -- Specifics of Application of Cutting Ceramics with Functional Coating in Turning of High-Strength Materials -- Influence of Tool Rotational Speed on the Mechanical Properties of Friction Stir Welded Al-Cu-Li Alloy -- Effect of Sensitization Treatment on Corrosion Properties in Austenitic Stainless Steel 304 -- Synthesis of Porous Anodic Alumina (PAA) on Aluminum Alloy AA6061 in Mixture of Phosphoric Acid and Oxalic Acid -- The Effect of Sintering Temperature to the Microstructure of PM F75 (Co-Cr-Mo) Alloy -- Two-Step Solution Heat Treatment of AlSiCu Alloy for Improvement of Mechanical Properties -- A New Free-Machining Steel Containing Bismuth and Calcium -- The Effect of Solution Heat Treatment on Incipient Melting of Al2Cu Intermetallic Phase in Lightweight Materials -- Ageing Response of Powder Metallurgy AZ91 and AZ91 Reinforced with Multiwall Carbon Nanotube -- Microstructure and Mechanical Properties of Friction Stir Welded AA2195-T0 -- Thermal Aging of Dissimilar-Metal Weld Joints for Reactor Pressurized Vessels at Elevated Temperature -- Microstructural Evolution of Austenitic Stainless Steel AISI304 and AISI316 Subjected to High-Temperature Thermal Aging |
|
Effect of Concentration of Oxalic Acid on the Synthesis of Porous Anodic Alumina (PAA) on Aluminum Alloy AA6061 -- Segregation Measurement of Inconel 718 Feedstocks Used in Low-Pressure Metal Injection Molding -- Precision Hole Making on Laminates Composite: Comparison between Drilling and Punching -- Chapter 5: Construction Materials -- Dynamic Increase Factor of High Strength Concrete with Silica Fume at High Strain Rate Loading -- Experimental Study on Internal RH of BFS Mortars at Early Age -- Strength of Portland Cement with Several Composition of Bottom Ash in Different Fineness with Curing Time of 28 Days -- The Barriers and Strategies of Implementing the New Building Material (Fibre Cement Wall) in Malaysia Case Study: Aurum Synergy, Perlis, Malaysia -- Dolomite Quarry Waste as Sand Replacement in Sand Brick -- An Experiment on Bond Properties of Reinforcements Embedded in Ultra High Performance Concrete -- Bond-Slip Relation of Pretensioned Concrete Members for Various Tensioning Forces -- Assessment of Reinforced Concrete Building with Soil Structure Interaction Effect under Vertical Earthquake -- The Temperature Effect to the Concrete due to the Single Strike of High Electric Current -- Indoor Air Quality of Fired Clay Brick Incorporated with Mosaic Sludge -- Leachability of Heavy Metals from Steel Mill Sludge Incorporated in Fired Clay Brick -- Leaching of Heavy Metals Using TCLP and SPLP Method from Fired Clay Brick Incorporating with Mosaic Sludge -- Properties of Steel Mill Sludge Waste Incorporated in Fired Clay Brick -- Experimental Study of Slurry Infiltrated Fiber Reinforced Concrete -- The Chemical Composition and Fineness of Natural Cement at Different Raw Meal Proportion -- Effect of Chromium (II, III) Oxide and Cobalt Oxide on the Colour and Fineness of Cement -- Mechanical Properties of Volcanic Ash Based Geopolymer Concrete |
|
Potential of Geopolymer Mortar as Concrete Repairing Materials -- Review on Different Types of Geopolymer Concrete Fibres -- Effect of Coal Ash Properties on Compressive Strength of Bottom Ash-Based Geopolymer Concrete -- Microstructure and Mechanical Properties of Ambiently-Cured Blended Coal Ash-Based Geopolymer Concrete -- Effect of NaOH Concentration on Flexural Strength, Phase Formation and Microstructural Development of Kaolin Geopolymer Ceramic -- Effect of Ultra High Molecular Weight Polyethylene (UHMWPE) as Binder and Sintering Temperature in Kaolin Geopolymer Ceramics on Flexural Strength -- The Use of Borax in Deterring Flash Setting of High Calcium Fly Ash Based Geopolymer -- Simulation Behavior of Flexure in Reinforced Concrete Beam with Opening Reinforced with Glass Fiber Reinforced Polymer (GFRP) -- Flexural Behaviour of Patch-Repair Material Made from Unsaturated Polyester Resin (UPR)-Mortar -- Optical Data Support on Flexural Strength of Kaolin Coated Lumber Wood via Geopolymer Technology -- Chapter 6: Biomedical Engineering and Biotechnologies -- Study on a Fractional Model of Filtration Effect of Cigarette Filter Tip -- Preparation and Characterization of Chitosan/Alginate Polyelectrolyte Complex Prepared by Using Calcium Tripolyphosphate Ionic Gelator -- Analysis on Fluid Characteristics in Y-Shape Bifurcate Coronary Artery -- Performance of Newly-Fabricated Modular Surface Plasmon Resonance (mSPR) Sensor -- Simultaneous Saccharification and Co-Fermentation (SSCF) Using Banana and Pineapple Waste as Substrate -- Optimization of Eugenol Ester Using Statistical Approach of Response Surface Methodology -- Facile Synthesis of Activated Carbon from Swamp Taro Stalk via Single Step ZnCl2 Activation -- Synthesis and Characterization of Biomass Supported Ag, Co and Ag-Co Nanoparticles |
| Subject |
Materials science -- Congresses
|
|
TECHNOLOGY & ENGINEERING -- Engineering (General)
|
|
TECHNOLOGY & ENGINEERING -- Reference.
|
|
Materials science
|
| Genre/Form |
Conference papers and proceedings
|
| Form |
Electronic book
|
| ISBN |
9783035730203 |
|
3035730202 |
|
