| Description |
1 online resource (430 pages) : illustrations (some color) |
| Series |
Advanced materials research ; v. 1123 |
|
Advanced materials research ; v. 1123.
|
| Contents |
Intro -- Advanced Materials Science and Technology II -- Preface, Conference Organizers and Committees -- Table of Contents -- Chapter 1: Mathematical Theory and Numerical Methods -- Load Support Improvement on Superhydrophobic Surface in Lubricated-MEMS Using Numerical Investigation -- Application of Serpentine Flux Path Method into a Magnetorheological Valve by FEMM Simulation -- Fluctuation Theorem Application on 2-D Granular Materials Configurations -- Numerical Investigation of the Plastic Contact Deformation between Hemispheres: Variation of Radii Ratio and Normal Loads -- Optimization of Solvent System and Polymer Concentration for Synthesis of Polyvinyl Alcohol (PVA) Fiber Using Rotary Forcespinning Technique -- A Symbolic Computation of the Gravity Effect on the Electromagnetic Properties of Materials -- Numerical Solutions to Fast Transient Pipe Flow Problems -- Longitudinal Profiles of Atom Laser Propagation in a Cigar-Shaped Trap -- Performance Simulation on a Magnetorheological Valve Module Using Three Different Commercial Magnetorheological Fluid -- The Effect of a Hydrophobic Coating Material on Friction in a Micro-Slider Bearing: A Numerical Analysis -- Theoretical Studies of the Effects of Magnetic Field on the Phase Transition of Swollen Liquid Crystal Elastomers -- Investigation on the Elastic Modulus of Rubber-Like Materials by Straight Blade Indentation Using Numerical Analysis -- Chapter 2: Materials Synthesis and Properties Research -- Estimation of Van der Waals Interaction Using FTIR Spectroscopy -- Investigation on the Effect of B2O3 Additive on Microstructure and Magnetic Properties of Barium Hexaferrite -- Characterization of Main-Chain Liquid Crystal Elastomers by Using Differential Scanning Calorimetry (DSC) Method -- Transition Insulator-Metal and Antiferromagnetic-Paramagnetic Cu Doped in La0.47Ca0.53MnO3 |
|
The Effect of KOH Activation in Synthesis and Characterization of Zeolitic Imidazolate Frameworks-8 (ZIF-8) Templated Mesoporous Carbon -- The Effect of Low Vacuum Curing to Physical and Magnetic Properties of Bonded Magnet Pr-Fe-B -- The Effect of Powder Particle Size on the Structural and Magnetic Properties of Bonded NdFeB Magnet -- Poly(aniline-co-m-aminobenzoic acid): A Novel Ester Vapor Sensor and its Thin Film Deposition on Silane Functionalized SAM Glass Surface -- Preparation, Characterization and Catalytic Activity of Sulfated Zirconia by Varied Sol-Gel Method -- Synthesis of LiCoxMn2-xO4 by Low Temperature Solid-State Reaction for Cathode Material -- Texture Analysis of the Hot Rolling Austenitic Cr-Ni Steel Using Neutron Diffraction Method -- The Effect of Milling Time and Sintering Temperature on Synthesis of PbTiO3 by Mechanical Alloying -- Microstructure of AA7075 Based Composite by Accumulative Roll Bonding Process -- Aluminum-Carbon Metal Matrix Composites: Effect of Carbon Fiber and Aspect Ratio on the Mechanical Properties -- Crystalline Characterization and Dielectric Constant of Barium Strontium Titanates Prepared by Solid State Reaction -- Development of Geopolymer from Fly Ash and Metallurgical Slag -- Magneto-Conductance Effect of Natural Porphyrin Thin Films Fabricated by Spin Coated Method -- The Effect of Mixing Time on the Morphology and Mechanical Properties of Imperata cylindrica Cellulose -- Thermoelectric Properties Enhancement of NaCo2O4 through Ca Atom Partial Substitution on Na Atom -- Chapter 3: Eco-Friendly and Biocompatible Materials -- The Influence of Alkali Treatments on Tensile Strength and Surface Morphology of Cellulose Microfibrils -- The Effect of Glycerol and Oil Palm Empty Fruit Bunches Microcrystalline Cellulose Loading on Tensile Properties and Water Absorption of Cassava Starch Composite |
|
Benefeciation of Derived Bovine Bone Waste Hydroxyapatite Obtained from Meatballs Sellers and its Characterization -- Preliminary Study on the Biocompatibility of Stainless Steel 316L and UHMWPE Material -- A Bipolar Artificial Hip Joint Design for Contact Impingement Reduction -- Chitosan Membrane with Blending of Rice Hull Ash Silica and Polyethylene Glycol for Cu(II) Adsorption in Aqueous Solution -- Synthesis of Biodegradable Plastic Films from Oil Palm Empty Fruit Bunch Cellulose -- The Influence of Heat and Two Stages Precipitation in the Process of Natural Polymer Purification from the Byproduct of Bioethanol Process Base on Empty Palm Fruit Bunch -- Preparation of Chitosan-Alginate/PES Pervaporation Membranes for Bioethanol Dehydration -- The Influence of Adding Bio Inhibitor Sarang Semut (Myrmecodia pendans) to Carbon Steel API 5L Grade B in Solution of HCl 1 M -- The Effect of Sandblasting and Electropolishing on the Surface Roughness and Corrosion Rate of AISI 316L Stainless Steel -- The Effect of the Wall Thickness on Wear of an UHMWPE Acetabular Liner -- Sputtering of Titanium in Co-Cr-Mo Alloys for Orthopedic Implant Materials -- Comparison between Conventional and Ultrasonic Preparation of Chitosan from Shrimp Shells Waste -- Synthesis of Isopropyl Esters from Jatropha Curcas Oil at Short Time Reaction -- Effect of Acidic and Basic Environment to the Degradation Behavior of PLGA Nanocapsules for Biomedical Application -- Chapter 4: Nanomaterials -- Synthesis and Application -- Evolution of ZnO Nanoflower-Like Structure Formation and Growth during Synthesis and Paste Preparation -- Study on Morphology of Electrospun SiOC Fibers -- The Influence of ZnO Components on the Photocatalytic Activity of Fe3O4-CuO-ZnO Nanocomposites -- Synthesis of Sulfur-Doped Carbon Dots by Simple Heating Method |
|
Fabrication of PVA Fibers Loaded with Fe3O4 Nano Particles Using Electrospinner -- Physical Properties and Photocatalytic Activity of Fe- and Co-Doped ZnO Nanoparticles Synthesized via Surfactant Modified Co-Precipitation -- Fabrication of Carbon Nanomaterial Using Arc-Discharge in Liquid Method for Battery Application -- Synthesis and Fabrication of Nanoparticle-Based Thin Layer of Natural Porphyrin -- Effect of Temperature on Silver Nanorods Synthesized by Polyol Method -- Influence of Grain Size to Resistivity Relaxation of La0.7Sr0.3MnO3 Nanoparticles -- Photocatalytic Decolorization of Malachite Green in the Presence of Fe3O4/TiO2/CuO Nanocomposites -- Synthesis and Characterization of Al2O3 Nanoparticles and Water-Al2O3 Nanofluids for Nuclear Reactor Coolant -- Effect of the Concentration of Zinc Oxide Nano Fluid for Enhancing the Performance of Stirling Engine -- Fabrication of Poly(acrylonitrile)/PAN Nanofiber Using a Drum Collector Electrospinning System for Water Purification Application -- Photocatalytic Degradation of Methylene Blue Using TiO2/Carbon Nanoparticles Fabricated by Electrical Arc Discharge in Liquid Medium -- Transition Metal (Ni, Cr)-Doped ZnO Assisted CTAB Performance on Decolorization of Organic Dyes -- Photocatalytic Degradation of Methylene Blue and Methyl Orange with Fe-Doped ZnO Nanoparticles Modified with Natural Zeolite and Montmorillonite: Comparative Study -- Thermal Characterization of Bacterial Cellulose/Polyvinyl Alcohol Nanocomposite -- Effect of Catalyst Preparation Method on the Characteristics of Carbon Nanospheres as Anode Materials of Lithium Secondary Batteries -- In Vitro Release Characteristics of Hydrophobic Breast Cancer Drug Loaded Poly Lactic-co-Glycolic Acid (PLGA) Nanoparticles |
|
Montmorillonite Incorporated in Cr Doped ZnO Nanoparticles for Degradation of Organic Dyes in Water under UV Light Irradiation -- Chapter 5: Materials Manufacturing, Processing and Applications -- Co-Sensitization Promoted Light Harvesting Capability of Dye-Sensitized Solar Cell (DSSC) Using Anthocyanin-Based Dye -- The Effect of Addition of Indigenous Silica Powder from Lampung on the Concrete Performance after 1 Year Curing Time -- Utilization of Fly Ash for a Support Layer of Pervaporation Membrane -- The Effect of Sokka Clay on the Tensile and Burning Properties of rPP/Clay Composite -- Hot and Cold of Pressing Effect on ECAP-Parallel Channel Composite Based on Al/ANF Material -- Reducing Energy Consumption through Innovative Glass Layering Construction with Polyethylene Bubble Wrap at 2nd Floor Dean Faculty Room -- Effect of Drying Time on Mechanical Properties of Natural Rubber Products Filled with Modified Kaolin Prepared from Latex Dipping -- High Temperature Oxidation of the Hot Rolled ZrNbMoGe Alloy for Fuel Cladding Material of Pressurized Water Reactor -- Sensitivity Improvement of Conducting Polymer Based Sensor to Vehicle Emission Gas by Using Imprinting Method -- Highly Oriented ZnO:Al Thin Films as an Alternative Transparent Conducting Oxide (TCO) for Windows Layer of Solar Cells -- Physical and Chemical Modification of Sorghum Flour for the Potential Substitute of Wheat Flour -- Potential Implementation of Electronic Waste Based Magnetite Powder for Magnetorheological Elastomers -- Shellac Coated Hydroxyapatite (HA) Scaffold for Increasing Compression Strength -- Use of Natural Silica Sand as a Component for Prospective Fuel Cell Sealing Materials -- Effect of Aging on Mechanical Properties of Natural Rubber Latex Products Filled with Alkanolamide-Modified Cassava Peel Waste Powder (CPWP) |
| Notes |
Selected, peer reviewed papers from the International Conference on Advanced Materials Science and Technology (ICAMST 2014), September 16-17, 2014, Solo, Indonesia |
| Bibliography |
Includes bibliographical references |
| Notes |
Online resource; title from HTML table of contents page (Scientific.Net, viewed October 20, 2015) |
| Subject |
Materials science -- Congresses
|
|
Technology -- Congresses
|
|
TECHNOLOGY & ENGINEERING -- Engineering (General)
|
|
TECHNOLOGY & ENGINEERING -- Reference.
|
|
Materials science
|
|
Technology
|
| Genre/Form |
Conference papers and proceedings
|
| Form |
Electronic book
|
| Author |
Suryana, Risa, editor
|
| ISBN |
9783035700329 |
|
303570032X |
|
