| Description |
1 online resource (668 pages) : illustrations (some color) |
| Series |
Advanced materials research ; volume 1125 |
|
Advanced materials research ; v. 1125.
|
| Contents |
Intro -- Materials, Industrial, and Manufacturing Engineering Research Advances 2 -- Preface -- Table of Contents -- Chapter 1: Materials Engineering, Chemical Technologies and Materials Processing -- An Introduction to Lightweight, Energy Saving, Environment Friendly Magnesium Based Nanocomposites: Materials of Upcoming Generation -- Comparison of Three-Parameter Weibull Statistical Analysis of the Flexural Strength of Dense and Porous Sintered Clay -- Influence of Nano-Polyaniline Contents on Mechanical Properties of Crosslink Recycled Polypropylene Polyaniline -- TGO Formation with NiCoCrAlYTa Bond Coat Deposition Using APS and HVOF Method -- Alteration by Cerium Element on Primary and Eutectic Mg2Si Phases in Al-20%Mg2Si In Situ Composite -- Oxidation of Pure Aluminium Granules during In Situ Melting -- Effect of Silver Nanoparticles in Silicalite-1 Zeolite on Antireflection and Antibacterial Performances -- Improvement of Hydrophilic Stability of Diamond-Like Carbon Films by O2/CF4 Plasma Post-Treatment -- An Improvement of Photoanode Performance for Enhanced Efficiency in Dye-Sensitized Solar Cell -- Effect of Ingredient Loading on Vulcanization Characteristics of a Natural Rubber Compound -- Effect of Ingredient Loading on Water Transport Properties of a Vulcanized Natural Rubber Compound -- Effects of Electron Beam on Structure and Physical Properties of Natural Colorless Topaz -- Effect of Ingredient Loading on Surface Migration of Additives in a Surfactant-Loaded Natural Rubber Vulcanizate -- Characterisation of Moisture Absorption Effects on the Strength of Composite Materials -- Modeling Interlaminar Shear Crack-Jump Phenomenon in Fiber-Reinforced Polymer Composites -- Effect of the Gel Coat Composition on the Tensile Strength for Glass Fibre Reinforced Polyester Composites -- UV LED Curing Formulation for Polyacrylamide Hydrogels |
|
A Study on Post Weld Heat Treatment of Friction Stir Welded Al2195 Blank for Spin Forming -- Mechanical Properties of Shielded Metal Arc Welded Low Carbon Steel: Effect of Butt Joint Type and Uncapping of Excess Weldment -- Effects of Salinity on Nanosilica Applications in Altering Limestone Rock Wettability for Enhanced Oil Recovery -- The Effectiveness of Cationic and Polymer Inhibitors on Shale -- Improved Coefficient of Friction Using Different Types of Lubricants in Drilling Operation -- Chapter 2: Materials and Technologies in Environmental Engineering, Bio- and Green Production -- Cellulose Nanowhiskers Reinforced Green Nanocomposites: Some Recent Development -- Mechanical and Thermal Properties of Rubber Toughened Poly(Lactic Acid) -- Mechanical Behavior of Composite Multilayered Basalt/E-Glass/Epoxy Pipe under Internal Pressure -- Effect of Colorant on Tensile Strength and Carbonyl Index of Oxo-Biodegradable Low-Density Polyethylene Films during Thermal Aging -- Sorption Kinetics of Pro-Oxidant-Loaded PE Plastic Bags in Aqueous Media -- Effect of Filter Aids on Pressure Drop and Permeability of Two Different Filter Media -- Novel Hydrophilic Chitosan and Sago Based Membranes for Pervaporation of Organic-Water Mixtures -- Highly Response and Sensitive Copper Sensors Based on Chitosan Films -- Overview on Mechanical-Chemical Ionic Liquid Pretreatment Study on Bioethanol-Based Lignocellulosics Biomass -- Characterization of Nanosilica of Tapioca Peel as Adsorbent for Biomethane Storage System -- Tensile and Morphological Properties of Hybrid Montmorillonite/Microcrystalline Cellulose Filled Polylactic Acid Composites: Effect of Filler Ratio -- Effects of Pre-Treatment Conditions on Black Tilapia Fish Scales for Gelatin Extraction |
|
Biopolymeric Adsorbent for the Removal of Methylene Blue: Characterizations, Equilibrium Isotherms and Kinetic Studies -- Effect of Solvent on Adhesion Property of Glass Fiber Recycled by Superheated Steam -- Recycling Technique of Carbon Fiber Laminate Using Hydrolysis Near Critical Region -- Preparation of Cellulose Nanocrystal Aerogel from Wastepaper through Freeze-Drying Technique -- Effect of Fluidization Number on the Combustion of Empty Fruit Bunch in a Fluidized Bed -- Determination of Volatile Organic Compounds (VOCs) at Selected Pump Stations in Skudai, Johor Bahru -- Carbon Dioxide Removal by Using Absorption Process with 5M Aqueous Solution of 2-(Methylamino)Ethanol -- A Theoretical Performance of MR-DeDuster as a Fine Dust Emission Control System -- Particulate Emission from Biomass Fuel Combustion -- An Investigation of Carbon Dioxide Sequestration on Amine-Modified Kenaf: Adsorption Isotherm Study -- Compatibility Issue Related to the Use of Biodiesel with Automotive Materials -- Microwave Assisted Pyrolysis of Rice Husk in the Presence of Eco Friendly Microwave Absorber in Producing Bio-Oil -- Chapter 3: Materials and Technologies in Construction -- Cathodic Protection Effect of Reinforced Concrete Beam Specimens with Zinc Sacrificial Anode in Marine Environment -- The Experimental Measurement on the Throwing Power of Sacrificial Anode Cathodic Protection for Concrete Piles in Natural Sea Water -- Assessment of the Elastic Stress of 304 Stainless Steel Using Half-Cell Potential Measurement -- Influence of Ion Irradiated Recycled Polyethylene on Physical Properties of Bituminous Binder -- Utilization of Variable Resistor for Improvement of Impressed Current Cathodic Protection System on Reinforced Concrete Structures -- Fresh Properties of Self-Compacting Concrete Integrating Coal Bottom Ash as a Replacement of Fine Aggregates |
|
Effect of External Environment on the Properties of Selected Plasters -- Determination of Salt Transport Properties of Sandstone: A Combined Experimental/Computational Approach -- A Study on the Structural Analysis of Jacket Substructure Related to Offshore Wind Power Environment -- Chapter 4: Materials and Technologies for Biomedical Application -- Surface Characterization of Biomimetic Hydroxyapatite-Silver Functionalized on Polydopamine Film -- Effect of Sintering Temperature on the Mechanical Properties of Nanostructured Ceria-Zirconia Prepared by Colloidal Process -- New Solvent System for the Fabrication of Polyvinyl Alcohol -- Gelatin Nanofibers via Electrospinning -- Composite of Poly Lactid Co-Glycolic Acid (PLGA)-Collagen Coated by Chitosan as Candidate of Hollow Fiber Small Diameter Vascular Graft -- Investigation of Gamma Radiation on Hydroxyapatite Synthesized from Chicken Eggshell by ESR Spectroscopy -- Preparation and Characteristic of Hydroxyapatite Synthesized from Cuttlefish Bone by Precipitation Method -- The Effect of Silane on the Biomechanical Properties of PEEK/HA Composite -- Design of Above-Knee Prosthesis: A Finite Element Stress Analysis -- Porous Magnesium Scaffolds for Bone Implant Applications: A Review -- Effects of Alkaline Treatment on Corrosion Behavior of Biodegradable Magnesium -- Effect of Heat Treatment on Surface Morphology of Titanium -- Characterisation and In Vitro Bioactivity of UV-Treated Anodised Titanium -- Anodic Oxidation of Titanium in Acetic Acid for Biomedical Application -- Effect of UV Light Treatment Condition on Apatite Formation of Anodised Titanium -- Effect of UV Wavelength on Apatite Formation of Anodised Titanium -- Analysis on Compressibility of Dental Amalgam Using Nanomaterial Zinc Oxide (ZnO) -- Effect of Calcination on the Properties of Hydroxyapatite from Tilapia Fish Bones |
| Notes |
Selected, peer reviewed papers from the 2nd International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC 2015), February 4-6, 2015, Bali, Indonesia |
| Bibliography |
Includes bibliographical references |
| Notes |
Online resource; title from HTML table of contents page (Scientific.Net, viewed January 26, 2016) |
| Subject |
Materials -- Congresses
|
|
Industrial engineering -- Congresses
|
|
Manufacturing processes -- Research -- Congresses
|
|
TECHNOLOGY & ENGINEERING -- Engineering (General)
|
|
TECHNOLOGY & ENGINEERING -- Reference.
|
|
Industrial engineering
|
|
Manufacturing processes -- Research
|
|
Materials
|
| Genre/Form |
Conference papers and proceedings
|
| Form |
Electronic book
|
| Author |
Kurniawan, Denni, editor
|
|
Nor, Fethma M., editor
|
| ISBN |
9783035700862 |
|
3035700869 |
|
