| Description |
1 online resource |
| Series |
Minerals, metals & materials series |
|
Minerals, metals & materials series
|
| Contents |
Intro -- Preface -- Contents -- About the Editor -- Program Organizers -- Aluminum Committee 2020-2022 -- Part I Alumina and Bauxite -- 1 The Application of Intelligent Control to Red Mud Settling and Washing in an Alumina Refinery -- 2 Alumina Refinery Volume Control -- 3 The Study of TCA Applied in Organic Removal from Sodium Aluminate Solution -- 4 Flotation Desulfurization of Acidified High-Sulfur Bauxite: Effects of Regulators -- 5 Optimization of Zinc Removal Process in Sodium Aluminate Solution Based on Orthogonal Experiment -- 6 Collection and Selectivity Contrast of Propyl Gallate and Sodium Oleate for Diaspore and Kaolinite Flotation -- 7 Effect of High Shear Agitation on Surface Properties of Diaspore and Kaolinite -- 8 Silicon Rich Iron Alloy from Bauxite Residue -- 9 Bauxite Residue Neutralization Potential Using Biogenic Sulfuric and Citric Acids -- 10 Study on the Acid Leaching of Metal Components in Bayer Red Mud -- 11 Gravity Methods Applied to Bauxite Residue for Mineral Pre-concentration -- Part II Aluminum Alloys, Processing and Characterization -- 12 Anodization Compatibility of Eutectic Aluminum-Cerium Alloys -- 13 Al-Sm Alloys Under Far-From-Equilibrium Conditions -- 14 Effect of Minor Additives to Al-Zn-Mg Alloys on Welding and Corrosion Performance for Building Constructions -- 15 Mechanism Behind Al/Cu Interface Reaction: The Kinetics and Diffusion of Cu in Forming Different Intermetallic Compounds -- 16 Phase Formation of Mo- and Cr-Rich Compounds in an Al-Si Cast Alloy -- 17 Understanding the Effect of Quench Delay and Alloy Chemistry on Various 6000 Series Alloy Systems -- 18 Effect of Heat Treatment on the Microstructure and Mechanical Properties of LB-PBF AlSi10Mg and Scalmalloy |
|
19 Thermal Properties of Hybrid Al-Cu-Components Produced by Combining Powder Pressing and Semi-solid Forming Strategies -- 20 Simulations of Wear-Induced Microstructural Evolution in Nanocrystalline Aluminum -- 21 High-Throughput Aluminum Alloy Discovery Using Laser Additive Manufacturing -- 22 Manufacturing A206 Aluminum Alloy by Step Sand Casting: Effect of Solidification Time on Mechanical and Surface Properties of the Cast Samples Using Experimental and Simulation Results -- 23 Experimental and Numerical Examinations Regarding the Material Flow of Combined Rolling Extrusion Process -- 24 Comparison of Simulation and Real Life to Set Up a Holistic Approach for the Extrusion Process -- 25 Computational Simulation of Nanoparticle Distributions in Metal Matrix Composite Casting Processes -- 26 Effect of Thermomechanical Processing on Strengthening of the 5181 Alloy (with 0.03% Sc) Sheets for Preservation of 40% Improved Strength Compared with 5083 -- 27 The Effect of Rare Earth Mischmetal on the High Temperature Tensile Properties of an A356 Aluminum Alloy -- 28 Effects of Ultrasonic Melt Processing on Microstructure, Mechanical Properties, and Electrical Conductivity of Hypereutectic Al-Si, Al-Fe, and Al-Ni Alloys with Zr Additions -- 29 The Corrosion Behavior of 5xxx and 6xxx Aluminum Alloys with Trace Calcium -- 30 Review of Retrogression Forming and Reaging for AA7075-T6 Sheet -- 31 Fatigue and Failure Analysis of an Additively Manufactured Contemporary Aluminum Alloy -- 32 Investigation of Weld Quality for Friction Stir Welding of Extrued 6XXX Series Aluminium Alloys -- 33 The Effect of Al₃Er Particles on the Structure and Mechanical Properties of an Al-Mg Alloy |
|
34 Microstructure Evolution of an Al-Fe-Ni Alloy with Zr and Sc Additions Upon Different Cooling Rates During Solidification for Improving the Mechanical and Electrical Conductivity Properties -- 35 Microstructure and Mechanical Properties of a Precipitation-Hardened Al-Mn-Zr-Er Alloy -- 36 Characterization of the Microstructure of Al-Mg Alloy Matrix Syntactic Foam by Three-Dimensional Analysis -- 37 Thermal Analysis of the Solidification Behavior of AA7075 Containing Nanoparticles -- 38 Microstructural Evolution of Ultra-Fine Grained (UFGs) Aluminum in Tribological Contacts -- 39 Microchemistry Evolution for 8xxx Alloys by Homogenization -- 40 Evaluation of Microstructures and Hardness of Al-10Si-0.45Mg-0.4Sc Alloy Powders -- 41 Shear Assisted Processing and Extrusion of Aluminum Alloy 7075 Tubing at High Speed -- 42 Shear Assisted Processing and Extrusion of Thin-Walled AA6063 Tubing -- 43 Influence of the Quench Rate and Trace Elements on 6XXX Alloys -- 44 The Combined Method for Producing Long Products from Aluminium and Aluminium Alloys -- 45 Effect of Extrusion Process on Mechanical, Welding, and Corrosion Behaviour of 6XXX Series of Aluminium Alloys -- 46 Development and Characterization of the Integrally Stiffened Cylinder (ISC) Process for Launch Vehicles and Aircraft Fuselage Structures -- 47 TIG Welding of Dissimilar High-Strength Aluminum Alloys 6061 and 7075 with Nano-Treated Filler Wires -- Part III Aluminum Reduction Technology -- 48 Optimization of Thermal Characteristics and "Output Side Energy Saving" of Aluminum Reduction Cell -- 49 R & amp -- D Projects for Improving Aluminium Smelting Technology: An Energy Reduction Initiative -- 50 Mass Transport by Waves: Bath-Metal Interface Deformation, Rafts Collision and Physical Model -- 51 Modeling Anode Current Pickup After Setting |
|
52 Superconductor Busbars-High Benefits for Aluminium Plants -- 53 Coupled SPH-DEM to Simulate the Injection of a Powder into a Liquid with Heat Transfer and Phase Change -- 54 Individual Anode Current Monitoring During Aluminum Reduction Cell Power Reduction -- 55 Carbon Dust-Its Short-Term Influence on Potroom Operations During Anode Change -- 56 Experience with Lengthy Pot Hibernation at Alcoa Baie-Comeau -- 57 The Rise and Fall of CVG Venalum Primary Aluminium Plant -- 58 Prevention and Control Measures of the Cathode Voltage Drop Rise of Aluminum Electrolytic Cell Due to Unstable Power Supply Load -- 59 The Aluminium Electrolysis Cell Heat Balance Challenge Under Low Voltage -- 60 Production Management of Aluminum Electrolysis at Super Low Voltage -- 61 Improvement to Alpsys Instability and Alumina Feeding Control -- 62 Low and High Voltage PFC Slope Coefficient Monitoring During Pot Start-Up -- 63 Research and Application of Direct Welding Technology on Super Large Section Conductor -- 64 Latest Developments in GTC Design to Reduce Fluoride Emissions -- 65 Process and Environmental Aspects of Applying Unshaped Carbon Materials for Cell Lining Purposes -- 66 Research on Wet Acid-Free Treatment Technology for SPL -- 67 Characterisation of Powders-Precondition for Plant Engineering -- 68 Gas Treatment in the GE Pot Integrated ABART Modules (PIA) -- 69 Instant Monitoring of Aluminum Chemistry in Cells Using a Portable Liquid Metal Analyzer -- 70 Dissolution Characteristics and Concentration Measurements of Alumina in Cryolite Melts -- 71 On Gaseous Emissions During Alumina Feeding -- 72 On the Feasibility of Using Low-Melting Bath to Accommodate Inert Anodes in Aluminium Electrolysis Cells -- 73 Electrochemical Reduction and Dissolution of Aluminium in a Thin-Layer Refinery Process |
|
74 On Optimal Control of Al₂O₃ Concentration in the Aluminum Reduction Cell -- 75 Influence of Additives on Alumina Dissolution in Superheated Cryolite Melts -- Part IV Aluminum Reduction Technology Across the Decades: An LMD Symposium Honoring Alton T. Tabereaux and Harald A. Øye -- 76 Alton Tabereaux: A Humble Individual Who Dedicates His Lifetime to Aluminum-An Aluminum Legend of Our Time -- 77 Awakening of the Aluminum Industry to PFC Emissions and Global Warming -- 78 Application and Adaptability of MHD Stability Computation for Modern Aluminium Reduction Cells at Extreme Conditions of Low ACD -- 79 Investigation of Cyclic Process Variations Within Hall-Héroult Reduction Cells -- 80 In-Line Cell Position and Anode Change Effects on the Alumina Dissolution -- 81 History of Computer Control of Aluminum Reduction Cells -- 82 Balancing the Modern Challenge of Operating Aluminium Smelters-Minimizing Energy Consumption, Minimizing Greenhouse Gas Emissions, and Maximizing the Productivity of Assets -- 83 Hydro's New Karmøy Technology Pilot: Start-Up and Early Operation -- 84 AP12 Low-Energy Technology at ALRO Smelter -- 85 New Phase in Upgrade of Søderberg Technology at RUSAL's Smelters -- 86 Stepped Collector Bar-Continuous Developments in Low Amperage Hall-Héroult Cell to Reduce Voltage Drop -- 87 Biocarbon in the Aluminium Industry: A Review -- 88 Forty Years of Trondheim International Course on Process Metallurgy of Aluminium -- 89 Establishing a Chemical Model of the Melt in the Cathode -- 90 Heating New Anodes Using the Waste Heat of Anode Butts Establishing the Interface Thermal Contact Resistance -- 91 Forty Years of Cathode Block Evolution at EGA -- 92 Wetting of Carbon Cathodes by Molten Electrolyte and Aluminium -- 93 Optimising Anode Performance in Albras Potlines -- Part V Cast Shop Technology |
| Summary |
The Light Metals symposia at the TMS Annual Meeting & Exhibition present the most recent developments, discoveries, and practices in primary aluminum science and technology. The annual Light Metals volume has become the definitive reference in the field of aluminum production and related light metal technologies. The 2021 collection includes contributions from the following symposia: Alumina and Bauxite Aluminum Alloys, Processing, and Characterization Aluminum Reduction Technology Aluminum Reduction Technology Across the Decades: An LMD Symposium Honoring Alton T. Tabereaux, Halvor Kvande and Harald A. ye Cast Shop Technology Electrode Technology for Aluminum Production |
| Notes |
International conference proceedings |
|
Includes indexes |
|
Online resource; title from PDF title page (SpringerLink, viewed March 26, 2021) |
| Subject |
Light metals -- Congresses
|
|
Light metals
|
| Genre/Form |
proceedings (reports)
|
|
Conference papers and proceedings
|
|
Conference papers and proceedings.
|
|
Actes de congrès.
|
| Form |
Electronic book
|
| Author |
Perander, Linus, editor
|
|
Minerals, Metals and Materials Society. Annual Meeting (149th : 2020 : San Diego, Calif.)
|
| ISBN |
9783030653965 |
|
303065396X |
|
9783030653972 |
|
3030653978 |
|
9783030653989 |
|
3030653986 |
|
