| Description |
1 online resource : illustrations |
| Contents |
Part 1. Best Paper -- Research and Demonstration Center for the Production of Large-Area Lithium-Ion Cells / G. Reinhart, T. Zeilinger, J. Kurfer, M. Westermeier and C. Thiemann, et al. -- Flexible Manufacturing of Lightweight Frame Structures with an Integrated Process Chain / D. Pietzka and E. Tekkaya -- Production System with Respect for Variable Quantities for an Economical Electric Vehicle Production / G. Schuh, J. Arnoscht, C. Nee and B. Schittny -- Topology-Optimized Implants: Medical Requirements and Partial Aspects of a Design Engineering Process Chain / R. Neugebauer, C. Rotsch, S. Scherer, M. Werner and A. Böhm, et al. -- Automated Approach to Exchange Energy Information / J. Schlechtendahl, P. Eberspächer, S. Schrems, P. Sekler and A. Verl, et al |
|
Part 2. Electric Mobility -- Intelligent Onboard Networks for the Flexible Production of Electric Vehicles / J. Brix, M. Merdes, A. Schäfer, R. Wößner and J. Stallkamp -- Integrated Product and Factory Design for Lithium-Ion Batteries / A. Kampker, B. Franzkoch, C. Nowacki and H. Heimes -- Modular Chassis Product Platform Considering Variable Quantities for an Economical Electric Vehicle Production / G. Schuh, J. Arnoscht, S. Rudolf and K. Korthals -- Method to Determine and Quantify Changes in Value Chains Caused by E-Mobility / W. Sihn, D. Palm, H. Gommel, W. Tober and C. Bauer -- A Workshop-Centered Battery Exchange System for Electric Vehicles / A. Rost, J.-P. Schuh, K. Pfeiffer and A. Verl -- E-Antrieb.Net: Development and Production Environment for Electric Drive Trains in a SME Focused Network / G. Schuh, A. Kampker, T. Vogels, C. Nowacki and R. Schmitt, et al |
|
Part 3. Lightweight Construction -- Machining of [beta]-Titanium Under Cryogenic Conditions: Process Cooling by CO2-Snow / C. Machai, H. Abrahams and D. Biermann -- Smart Semi-finished Parts for the Application in Sheet-Metal Structures / R. Neugebauer, L. Lachmann, W.-G. Drossel, M. Nestler and S. Hensel -- Novel Robot-Based End-Effector Design for an Automated Preforming of Limb Carbon Fiber Textiles / G. Reinhart and C. Ehinger -- Manufacturing Technologies for Lightweight Applications with Thermoplastic Textile-Reinforced Sandwich Structures / K. Großmann, A. Mühl, C. Cherif, K.-H. Modler and F. Adam, et al. -- Automated Manufacturing of Fiber-Reinforced Thermoplastic 3D-Lightweight Components / C. Brecher, M. Emonts, M. Dubratz and A. Kermer-Meyer -- Lightweight Products by Load Optimized Profile Design / M. Storbeck, P. Beiter, S. Berner, M. Brenneis and W. Schmitt, et al. -- Improvement of Denting Behavior of Aluminum Sheet by Pre-stretching / A. Werber and M. Liewald |
|
Part 4. Mass Production Ability -- Diamond Machining of Nitrocarburized Steel Molds for the Mass Production of Optical Components / E. Brinksmeier, R. Gläbe and J. Osmer -- Square Foot Manufacturing: A New Approach for Desktop-Sized Reconfigurable Machine Tools / J.P. Wulfsberg, P. Kohrs, S. Grimske and B. Röhlig -- Mobile Camera for Measuring and Testing in the Working Area of Machine Tools / E. Hohwieler, R. Feitscher and E. Uhlmann -- Modelling the Costs of Autonomous Logistics / B. Scholz-Reiter, S. Sowade and M. Teucke -- Dealing with the Need for Flexibility and Economies of Scope in Global Production Network Design / G. Schuh, J. Nöcker, R. Varandani, J. Schwartze and R. Schilling -- EMOTIO: Systematic Customer Integration into the Process of Innovation / R. Schmitt, S. Humphrey and M. Köhler -- Assembly Oriented Design Method for Reconfigurable Processes and Equipment / R. Müller, M. Esser and J. Eilers |
|
Part 5. Medical Technology -- CoCr Is Not the Same: CoCr-Blanks for Dental Machining / B. Karpuschewski, H.J. Pieper, M. Krause and J. Döring -- Polyamide 12: Carbon Nanotube Composite Material Under the Aspect of Future Application as Balloon Catheter Material / M. Ghahremanpour, G. Lorenz, T. Wörsching, M. Bogner and I. Maier, et al. -- Manufacturing of Individualized Cranial Implants Using Two Point Incremental Sheet Metal Forming / A. Göttmann, M. Korinth, V. Schäfer, B.T. Araghi and M. Bambach, et al. -- Fiber-Reinforced Plastics Enable New Prospects for Minimal Invasive Devices and Interventions / C. Brecher, M. Emonts, A. Schütte and A. Brack -- Development, Simulation-Based Design and Metal Forming Production of Patient-Individual Hip Cups / B.-A. Behrens, N. Weigel, S.B. Escobar, C. Stukenborg-Colsman and M. Lerch, et al. -- IES: Instrument Exchange System for Minimally Invasive Surgery / D. Kaltenbacher, T. Cuntz, A. Pfaud, K. Fischer and A. Domnich, et al. -- Adjusting the Subsurface Properties of Biocompatible Magnesium-Calcium Alloys as Absorbable Implant Material by Machining Processes / B. Denkena, J. Köhler and A. Lucas |
|
Part 6. Resource Efficiency -- Achieving Energy Efficient Process Chains in Sheet Metal Forming / J. Schönherr -- Energy Value Stream: Increasing Energy Efficiency in Production / K. Erlach -- Influencing Densification of PM Gears / F. Klocke, C. Gorgels, P. Kauffmann and E. Gräser -- Model-Based Planning of Resource Efficient Process Chains Using System Entity Structures / R. Larek, E. Brinksmeier, T. Pawletta and O. Hagendorf -- Aluminum Scrap Recycling Without Melting / K. Pantke, V. Güley, D. Biermann and A.E. Tekkaya -- Virtual Production Systems: Simulating the Energy Consumption of Machine Tools / C. Brecher, S. Bäumler and J. Triebs -- Economical and Function-Oriented Manufacturing of Cylinder Running Surfaces of Internal Combustion Engines / B. Karpuschewski, H.-J. Pieper and F. Welzel |
| Summary |
To meet and adapt to the current and future trends and issues in technology and society, the science committee of The German Academic Society for Production Engineering (WGP) continues to define future topics for production technology. These themes represent not only the key focus for the scientific work of the WGP, but also the central themes of the first annual conference in June 2011, whose paper is publically available in this volume. Such themes, including electric mobility, medical technology, lightweight construction, and resource efficiency, as well as mass production ability have all been identified as future, large-scale, and long-term drivers of change. Future trends influence changes sustainably and fundamentally; they permeate society, technology, economics, and value systems and have an effect in virtually all areas of life. The WGP has, as part of its research, established for itself the goal of not only observing these emerging changes, but also of supervising and influencing their development in order to ensure steady progress, secure sustainability, and shape the future |
| Analysis |
Engineering |
|
Engineering design |
|
Industrial engineering |
|
Industrial and Production Engineering |
|
Production/Logistics/Supply Chain Management |
| Notes |
International conference proceedings |
| Bibliography |
Includes bibliographical references |
| In |
Springer eBooks |
| Subject |
Production engineering -- Congresses
|
|
TECHNOLOGY & ENGINEERING -- Industrial Engineering.
|
|
TECHNOLOGY & ENGINEERING -- Industrial Technology.
|
|
TECHNOLOGY & ENGINEERING -- Manufacturing.
|
|
TECHNOLOGY & ENGINEERING -- Technical & Manufacturing Industries & Trades.
|
|
Ingénierie.
|
|
Production engineering
|
| Genre/Form |
proceedings (reports)
|
|
Conference papers and proceedings
|
|
Conference papers and proceedings.
|
|
Actes de congrès.
|
| Form |
Electronic book
|
| Author |
Schuh, Günther.
|
|
Neugebauer, R. (Reimund)
|
|
Uhlmann, Eckart.
|
|
Wissenschaftliche Gessellschaft für Produktionstechnik.
|
| LC no. |
2012941503 |
| ISBN |
9783642244919 |
|
3642244912 |
|
3642244904 |
|
9783642244902 |
|
