Description |
1 online resource |
Series |
Lecture notes in mechanical engineering |
|
Lecture notes in mechanical engineering.
|
Contents |
Intro -- Preface -- Contents -- Mathematical Modelling of Core Roughness Depth During Hard Turning -- 1 Introduction -- 2 Rk Parameter and Coefficient KRk -- 3 Experimental Research -- 4 Results and Discussion -- 5 Conclusion -- References -- Unified Mathematic and Geometric Model of Cutting Edge Separation with Corner Radius in Turning -- 1 Introduction -- 2 Analytical Model of Tool Wear -- 3 Geometry of the Tool Workpiece System -- 4 Simplified Case of Tool -- Workpiece System -- 5 Experimental Verification of Model Correctness -- 6 Conclusions -- References |
|
Evaluation of Deflection of Thin-Walled Profile During Milling of Hardened Steel -- 1 Introduction -- 2 Experimental Details -- 3 Results and Discussion -- 4 Conclusions -- Referencing -- The Surface Texture of Ti6Al4V Titanium Alloy Under Wet and Dry Finish Turning Conditions -- 1 Introduction -- 2 Experimental Procedure -- 3 Results -- 4 Conclusions -- References -- Surface Roughness Analysis After Milling Aluminum-Ceramic Composite -- 1 Introduction -- 2 Experimental Details -- 3 Results and Discussion -- 4 Conclusions -- References -- Technological Aspects of Regeneration of Carbide End Mills |
|
1 Introduction -- 2 Aim, Range and Methodology of Research -- 3 Analysis of Test Results -- 3.1 Geometry of End Mills -- 3.2 Wear of End Mills -- 3.3 Cost of Regeneration -- 4 Summary -- References -- Influence of Milling Parameters on Tribological Properties of Aluminum-Ceramic Composite -- 1 Introduction -- 2 Experimental Details -- 2.1 Research Method -- 2.2 Materials of Tribological Pair -- 2.3 Scope of Tests -- 3 Results and Discussion -- 4 Summary -- References -- Analysis of the Turning Process to Optimize Energy Consumption -- 1 Introduction -- 2 Subject of Study -- 2.1 Research Stand |
|
2.2 Measurement Results -- 3 Summary -- References -- Quality of Gear Wheels in Selected Operations of the Manufacturing Process -- 1 Introduction -- 2 General Characteristics of Analysed Operations in Manufacturing Process of the Investigated Gear Wheels -- 3 Experimental Research -- 4 Discussion of Obtained Results -- 5 Summary -- References -- Analysis of Optimization Effects of Deflection Angle of a Disc-Type Grinding Wheel on Accuracy of Profile Dividing Grinding of Gears -- 1 Introduction -- 2 Characteristic of Workstation with Rapid Höfler 2000 Grinder |
|
3 Profile Dividing Grinding of A Selected Gear Wheels with Consideration of Deflection Angle Optimization of the Grinding Wheel -- 4 Results of Research and Discussion of Results -- 5 Summary -- References -- Evaluation of Geometrical Parameters of a Spur Gear Manufactured in an Incremental Process from GP1 Steel -- 1 Introduction -- 2 Research Methodology and Objectives -- 3 Analysis of Dimension and Shape Accuracy -- 3.1 ATOS II Triple Scan -- Making Measurements and Preparing Analysis -- 3.2 Gear Measurements Using Klingelnberg P40 Together with Analysis -- 4 Conclusions -- References |
Summary |
This book includes the best papers from two conferences on machining and abrasive machining, organized in Poland on September 11-12, 2019. The chapters discuss classical topics and emerging methods and models in machining, measurement, and quality control. They cover new technologies, such as water jet machining, discuss important topics such as energy efficiency in machining, and analyze different cutting methods, materials and mechanisms |
Notes |
Includes author index |
Subject |
Machining -- Measurement -- Congresses
|
|
Chemical engineering
|
|
Manufactures
|
|
Materials science
|
|
Measurement
|
|
Physical measurements
|
Genre/Form |
proceedings (reports)
|
|
Conference papers and proceedings
|
|
Conference papers and proceedings.
|
|
Actes de congrès.
|
Form |
Electronic book
|
Author |
Królczyk, Grzegorz M., editor
|
|
Niesłony, Piotr, editor
|
|
Królczyk, Jolanta, editor
|
ISBN |
9783030499105 |
|
3030499103 |
|