| Description |
1 online resource (706 pages) |
| Series |
Key Engineering Materials ; v. 659 |
|
Key engineering materials.
|
| Contents |
Intro -- Materials Science and Technology VIII -- Preface, Committees and Sponsors -- Table of Contents -- Chapter 1: Materials for Biomedical Application -- In Vitro Resorbability of Three Different Processed Hydroxyapatite -- Bleached Shellac as an Alternative Polymeric Matrix for In Situ Microparticle -- Metrodidazole In Situ Forming Eudragit RS Gel Comprising Different Solvents -- Physical and Mechanical Characterizations of Oxidized Regenerated Cellulose/Polycaprolactone Composite for Use as a Synthetic Dura Mater -- Physical Properties of Xyloglucan/Bacterial Cellulose Composite Film Plasticized with Glycerol -- Preparation and Characterization of Polymer Blends from Nang noi srisaket 1 Silk Fibroin, Gelatin and Chitosan Nanofiber Mats Using Formic Acid Solution -- Sintered Titanium-Hydroxyapatite Composites as Artificial Bones -- Synthesis and Characterization of Artificial Bone Material Using Calcium from a Natural Source -- Properties of Deproteinized Natural Rubber Latex/Gelatinized Starch Blended Films -- Chapter 2: Ceramic-Based Materials -- Application of Statistical Analysis in the Powder Injection Molding (PIM) of Mullite -- Composition-Microstructure-Property Relationships in BaTiO3 with Mg Addition -- Compressive Strength in Various Submersion Tests of Fired Clay Bricks from Chi River Sub-Basin -- Dispersion Stability of Drinking Water Treatment Sludge -- Effect of Rice Husk and Rice Husk Ash on Properties of Lightweight Clay Bricks -- Effect of Silica to Alumina Ratio on the Compressive Strength of Class C Fly Ash-Based Geopolymers -- Effect of Sintering Additive and Pyrolysis Temperatures on Porous Silicon Carbide -- Effects of Water Temperatures on Water-Soluble Binder Removal in Ceramic Materials Fabricated by Powder Injection Moulding -- Electromechanical Displacement of Soft/Hard PZT Bi-Layer Composite Actuator |
|
Fabrication of Fiber Cement Using Tobacco Stalk Pulp from Agricultural Residue -- Influence of Alkaline Concentration on Physical Properties of Porous Geopolymer Using Silica Fume as Foaming Agent -- Influences of Inhibitor and Firing Temperature on Efflorescence Reduction of Clay Products -- Microstructure and Properties of Zirconia Toughened Alumina Fabricated by Powder Injection Moulding -- Morphology and Phase Composition of Sol-Gel Derived Aluminum Borate Nanowhiskers -- Preparation and Characterization of Clays from Different Areas in Ban Bo Suak, Nan Province, Thailand -- Preparation and Properties of PSZTM Ceramics with Different Methods -- Properties of Sintered Brick Containing Lignite Bottom Ash Substitutions -- Properties of Steel Fiber Reinforced Geopolymer -- The Effect of Alumina/Glass Composite Composition on the Adhesion and Strength of a 96% Alumina Joint -- The Effects of Solvents on the Solvothermal Synthesis of BiVO4 Photocatalyst Powders -- The Effects of Water Removal Process on the Properties of Magnesium Aluminate Spinel Nanopowders Synthesized by Co-Precipitation Method -- The Study of Physical and Thermal Conductivity Properties of Cement Paste Containing Nanosilica -- Utilization of Glass Cutting Sludge and Sanitary Ware Sludge in Ceramic Pressed Bodies -- Effect of Firing Temperature and Mo Doping on the Synthesis of Solar-Reflective Sm2Ce2O7 Yellow Pigment -- Effect of Bi2O3 on Thermal Properties of Barium-Free Glass-Ceramic Sealants in the CaO-MgO-B2O3-Al2O3-SiO2 System -- Figures of Merit of Low-Cost CuAl0.9Fe0.1O2 Thermoelectric Material Prepared at Different Solid State Reaction Sintering Temperatures -- Study of the Hydrolytic Resistance of Glass Bottles under a High Fluctuated Weather Condition -- The Effect of Heat Treatment on Fe2+/Fe3+ Ratio in Soda-Lime Silicate Glass |
|
Effect of Particle Sizes on Film Formation Behavior of Hevea brasiliensis Natural Rubber Latex -- Effect of Various Extracted Solvent on DPPH Radical Scavenging Activity of Natural Rubber -- Effects of Particles Size of Nanosilica on Properties of Polybenzoxazine Nanocomposites -- Fabrication and Application of Nanostructures Using Gas-Assisted Hot Embossing and Self-Assembled Nanospheres -- Fabrication of Novel Polyhydroxybutyrate-co-Hydroxyvalerate (PHBV) Mixed with Natural Rubber Latex -- Functionalization of Styrene-Butadiene Rubber and Skim Latex by Photo-Catalytic Reaction Using Nanometric TiO2 Film as a Photocatalyst -- Improvement of Filler-Rubber Interaction by Grafting of Acrylamide onto Saponified Natural Rubber under Ultraviolet Radiation as a Continuous Process -- Improvement of Structure and Properties of Nanocomposite Foams Based on Ethylene-Vinyl Acetate (EVA)/Natural Rubber (NR)/Nanoclay: Effect of NR Addition -- Influence of Processing Oil Based on Modified Epoxidized Vegetable Oil with N-Phenyl-p-Phenylenediamine (PPD) on Extrusion Process Behaviors of Natural Rubber Compounds -- In Situ Reinforcement of PLA Using Nylon 6 in PLA/Nylon 6 Extrudate Blend via Twin-Screw Extrusion -- Investigation of Synthesis Parameters for Modification of Chitosan with Enrofloxacin -- Mechanical and Thermal Properties of Hemp Fiber Reinforced High Density Polyethylene Composites -- Mechanical and Thermal Properties of Silane Treated Pineapple Leaf Fiber Reinforced Polylactic Acid Composites -- Mechanical Properties of All-Cellulose Composites Made from Pineapple Leaf Microfibers -- More Values of L-Quebrachitol from Skim Natural Rubber Latex -- Morphology and Mechanical Properties of Polyoxymethylene and Acrylonitrile-Butadiene-Styrene Blends with Compatibilizer |
| Notes |
Print version record |
| Subject |
Materials science.
|
|
TECHNOLOGY & ENGINEERING / Engineering (General)
|
|
TECHNOLOGY & ENGINEERING / Reference
|
|
Materials science
|
| Form |
Electronic book
|
| ISBN |
3035700230 |
|
9783035700237 |
|
